Foundation Ground Helical Anchors

Many Foundation ground helical anchors are manufactured with square central shafts. For these Foundation ground helical anchors, the contribution of the shaft to the ultimate capacity is usually ignored and the total capacity is only calculated from the bearing capacity of the helical plate(s).
Product description

Foundation ground helical anchors

Product description


      This Guide should be used for preliminary calculations only and applies only to the deep installation of Screw-Piles and Helical Anchors in uniform soils. It is only applicable for design when the depth (D) to the top helical plate is greater than 10 times the diameter (B) of the helical plate and the minimum depth of embedment of the helical plate is 5 ft. The methods described in this Guide provide an estimate of the ULTIMATE capacity; the Engineer must apply an appropriate Factor of Safety to obtain the ALLOWABLE capacity.

Contribution of Shaft to Capacity
     Many Foundation ground helical anchors are manufactured with square central shafts. For these Foundation ground helical anchors, the contribution of the shaft to the ultimate capacity is usually ignored and the total capacity is only calculated from the bearing capacity of the helical plate(s). For Foundation ground helical anchors with round steel central shafts the shaft section between plates for multi-helix elements is ignored, but the shaft above the top plate may be included in design, at least for that section of the shaft in full contact with the soil as discussed in Section 3.

CODESIZEROD DIA MMLENGTHHELIXTENSILE STRENGTH
15225/8''1654''4''70KN
15235/8''1666''6''70KN
15245/8''1672''8''70KN
15255/8''1684''10''70KN
15263/4''1954''4''90KN
15273/4''1966''6''90KN
15283/4''1972''8''90KN
15293/4''1984''10''90KN
15301''2554''4''110KN
15311''2566''6''110KN
15321''2572''8''110KN
15331''2584''10''110KN

   Foundation ground helical anchors are wound into the ground much like a screw into wood. Foundation ground helical anchors are installed using various earthmoving equipment fitted with rotary hydraulic attachments. Machinery varies from skid-steer loaders to 5 tonne through 80 tonne excavators. Rotary hydraulic powerheads with torque capacities ranging from 5,000 Nm to 500,000 Nm are custom fitted using various boom configurations.

工艺.jpg

Hot Tags: foundation ground helical anchors, China, manufacturers, suppliers, factory, price, custom, design
Related Products
Feedback

Copyright © Qingdao Gold Power Machinery Co.,Ltd All Rights Reserved.Tel: +86-532-83531978