Guy Grip Dead End for Electric Power

PRODUCT DESCRIPTION The guy grip dead end is used for overhead power conductor and the connecting hardware of power overhead optical cable terminal, suspension, joint and so on.The first strand was originally developed in the United States in the 1940s and 1950s. The original product was used...
Product description

PRODUCT DESCRIPTION

The guy grip dead end is used for overhead power conductor and the connecting hardware of power overhead optical cable terminal, suspension, joint and so on.The first strand was originally developed in the United States in the 1940s and 1950s. The original product was used for the stress concentration position of the bare wire and the spiral line of protection of the electrical corrosion and arc burn position.After many years of development, the pre-twisted wire has been widely used in power transmission and distribution, fiber optic communication, electrified railway, cable TV, construction, agriculture and other fields.

Aluminium wire is 10 kV line in distribution network in the extensive use of the mainstream of the conductor, it has high tensile strength, good lightning protection performance, low cost, a series of advantages, is widely applied in the outskirts of the joints and rural electric circuit.However, if the aluminum conductor line is affected by the external force or the bad weather, it can easily lead to the fault of the conductor mixing.After the mixing short circuit, the wire will break the stock phenomenon.It is found that this condition must be properly repaired in a timely manner so as to avoid the mechanical property and conductive performance of the wire.

PRODUCT SHOW

微信图片_20171106102256_副本_副本.jpg

FACTORY SHOW

工厂_副本.jpg

Hot Tags: guy grip dead end for electric power, China, manufacturers, suppliers, factory, price, custom, design
Related Products
Feedback

Copyright © Qingdao Gold Power Machinery Co.,Ltd All Rights Reserved.Tel: +86-532-83531978